Enrichment and separation of antitumor triterpene acids from the epidermis of Poria cocos by pH‐zone‐refining counter‐current chromatography and conventional high‐speed counter‐current chromatography

Triterpene acids were extracted from the epidermis of Poria cocos (Schw.) Wolf. These acids were found to inhibit the growth of lung cancer cells in vitro and in vivo. An efficient method for the preparative separation of antitumor triterpene acids was established that involves the combination of pH‐zone‐refining counter‐current chromatography and conventional high‐speed counter‐current chromatography. We used pH‐zone‐refining counter‐current chromatography to concentrate the triterpene acids using a two‐phase solvent system composed of petroleum ether/ethyl acetate/methanol/water (3:7:5:5, v/v/v/v), trifluoroacetic acid (10 mM) was added to the upper phase as a retainer, and ammonia (10 mM) was added to the lower phase as an eluter. As a result, 200 mg concentrate of triterpene acids was obtained from 1.0 g of crude extract. The concentrate was further separated by conventional high‐speed counter‐current chromatography using a solvent system composed of petroleum ether/ethyl acetate/methanol/water (0.8:1.2:1.2:0.9, v/v), yielding 50 mg of poricoic acid A and 5 mg of poricoic acid B from 120 mg concentrate, respectively. The inhibitory activity of the major compound on lung A549 cells was examined and poricoic acid A was found to significantly inhibit the growth of A 549 cells.     

A DFT study of CO<Subscript>2</Subscript> electrochemical reduction on Pb(211) and Sn(112)

Electrochemical reduction of CO2 has the benefit of turning greenhouse gas emissions into useful resources. We performed a comparative study of the electrochemical reduction of CO2 on stepped Pb(211) and Sn(112) surfaces based on the results of density functional theory slab calculations. We mapped out the potential energy profiles for electrochemical reduction of CO2 to formate and other possible products on both surfaces. Our results show that the first step is the formation of the adsorbed formate(HCOO*) species through an Eley-Rideal mechanism. The formate species can be reduced to HCOO- through a oneelectron reduction in basic solution, which produces formic acid as the predominant product. The respective potentials of forming HCOO* are predicted to be -0.72 and -0.58 V on Pb and Sn. Higher overpotentials make other reaction pathways accessible, leading to different products. On Sn(112), CO and CH4 can be generated at -0.65 V following formate formation. In contrast, the limiting potential to access alternative reaction channels on Pb(211) is -1.33 V, significantly higher than that of Sn.     

Altering the Position of Phenyl Substitution to Adjust Film Morphology and Memory Device Performance

In this study, two structural isomers α‐PBT and β‐PBT, which only differ in the phenyl substituent position on the quinoline chromophore, have been designed and successfully synthesized. The influences of substituent position on the film morphology and the storage performance of the devices were investigated. Both molecules employed in the memory devices exhibited same nonvolatile binary (write‐once‐read‐many‐times; WORM) characteristics, but the switch threshold voltage (Vth) of the β‐PBT‐based device was clearly lower than that of the α‐PBT‐based device. Simulation results demonstrate that the variation of the phenyl substituent position led to different intermolecular stacking styles and thus to varied grain sizes for each film morphology. This work illustrates that altering the phenyl substituent position on the molecular backbone could improve the quality of the film morphology and reduce power consumption, which is good for the rational design of future advanced organic memory devices (OMDs).     

Indecomposable decomposition of tensor products of modules over Drinfeld doubles of Taft algebras

In this paper, we study the tensor product structure of the category of finite dimensional modules over Drinfeld doubles of Taft Hopf algebras. Tensor product decomposition rules for all finite dimensional indecomposable modules are explicitly given.     

Preparation and adsorption properties of glucose molecularly imprinted polymers in hydrous solution for effective determination of glucose in fruits by MISPE–HPLC

In this paper, a kind of surface molecular imprinting polymers in hydrous solution, with glucose selectively recognition, was successfully synthesized by surface molecular imprinting method, using glucose (Glu) as template molecule, acrylamide as functional monomers, N,N′-methylenebisacrylamide as the cross-linking agent, ammonium peroxydisulfate as the initiator, activated silica gel (SiO₂@NH₂) as support particles. The influences of cross-linker, initiator as well as support particles amount on the adsorption capacity of Glu-MIPs were performed by single-factor experiments. The optimum conditions were 100 mg of cross-linker, 25 mg of initiator and 1 g of SiO₂@NH₂. The adsorption and thermodynamics research revealed that the adsorption of MIPs was fitted to Langmuir, maximum imprinting factor of 2.49 and maximum absorption capacity of 50.06 mg/g. Furthermore, a procedure of extraction of glucose from real fruits samples using the Glu-MIPs as solid-phase extraction adsorbent was developed to apply in analytical techniques.     

Preparation and thermal reliability of <Emphasis Type="Italic">N</Emphasis>-butyl stearate/methyl palmitate composite phase change material

In this study, a series of binary mixtures of N-butyl stearate (nBS) and methyl palmitate (MP) were used to produce a novel composite phase change material (CPCM) for potential application in the eastern China, and their thermal properties were investigated by differential scanning calorimetry (DSC). The results of DSC indicated that the mixture consisting of 10 mass% nBS and 90 mass% MP is optimum as the CPCM in terms of the phase change temperature ranges (T _f = 19.74–5.59 °C; T _m = 18.34–33.80 °C) and latent heats (ΔH _f = 176.8 J g^?1; ΔH _m = 189.3 J g^?1). On the other hand, the thermal reliability and chemical stability of the CPCM after 120, 180, 240, 300, 360 and 500 accelerated thermal cycling tests were studied by DSC and fourier transform infrared (FTIR) analysis. The results demonstrated that the CPCM had good thermal reliability and chemical stability.     

Standard molar enthalpy of formation of [(C12H8N2)2Bi(O2NO)3] and its biological activity on Schizosaccharomyces pombe

The title complex [(C₁₂H₈N₂)₂Bi(O₂NO)₃] was synthesized by reaction of 1,10-phenanthroline (phen) and Bi(NO₃)₃·5H₂O. The structure of the complex was characterized by single-crystal X-ray diffraction, IR spectroscopy, and elemental analysis. An advanced solution-reaction isoperibol microcalorimeter was applied to determine the standard molar enthalpies of formation at 298.15 K of the complex and Bi(NO₃)₃·5H₂O, giving –(798.92 ± 5.99) and –(1986.87 ± 0.20) kJ mol⁻¹, respectively. The biological effect of the complex was evaluated by microcalorimetry on the growth of Schizosaccharomyces pombe (S. pombe). According to thermogenic curves, the corresponding thermokinetics and thermodynamic parameters were derived. The complex had good bioactivity on the growth metabolism of S. pombe, with the value of IC₅₀ being 2.8 × 10⁻⁵ mol L⁻¹.

     

Ni<Subscript>0.37</Subscript>Co<Subscript>0.63</Subscript>S<Subscript>2</Subscript>-reduced graphene oxide nanocomposites for highly efficient electrocatalytic oxygen evolution and photocatalytic pollutant degradation

A series of Ni_0.37Co_0.63S₂-reduced graphene oxide nanocomposites with different graphene contents (NCS@rGO-x) has been successfully prepared via a facile one-step hydrothermal method and applied as the catalysts for the oxygen evolution reaction (OER) and degradation of organic pollutants. The XRD and FESEM analyses revealed that the phase structure and morphology of NCS nanoparticles were substantially influenced by the graphene contents. The phase structure of NCS nanoparticles gradually transformed from primary NiCo₂S₄ to Ni_0.37Co_0.63S₂ and the morphology and size of NCS nanoparticles were found to become more regular and homogeneous with the increase of graphene concentration. On the NCS@rGO-x nanocomposites, the NCS@rGO-2 sample demonstrated the best catalytic activity toward the OER, which delivers a stable current density of 10 mA cm^?2 at a small overpotential of ～276 mV (vs. RHE) with a Tafel slope as low as 48 mV dec^?1. Furthermore, the NCS@rGO-2 sample showed the remarkable photocatalytic activity for degradation of methylene blue (MB), which may be attributed to the increased reaction sites and high separation efficiency of photogenerated charge carries due to the electronic interaction between NCS nanoparticles and rGO. All these impressive performances indicate that the NCS@rGO-2 nanocomposite is a promising catalyst in energy and environmental fields.

Open image in new window

Graphical abstract A series of Ni_0.37Co_0.63S₂-reduced graphene oxide nanocomposites with different graphene contents has been successfully prepared and applied as the catalysts for the oxygen evolution reaction (OER) and degradation of organic pollutants. The NCS@rGO-2 catalyst-modified stainless steel wire mesh (SSWM) electrode delivers a stable current density of 10 mA cm^?2 at a small overpotential of ～276 mV (vs. RHE) with a Tafel slope as low as 48 mV dec^?1. At the same time, the NCS@rGO-2 catalyst is also first investigated as an efficient photocatalyst for degradation of MB.